PPM-88 and PPM series

This article would benefit from a more standard writing style. Articles should be formally written and should be divided into proper sections. For reference, the author should read other, more standardized articles.

The PPM-88 is a Russian gasmask (possibly the second most common in Russia).

The Russian Federation PPM-88 Gas Mask. Also shown is the OEM filter, certification paperwork, some Russian patches and refridgerator magnets and Military Grade Bullets for purchasing in-game items!

It is used for chemical, biological and radioactive agents. It is closely related to the GP-9.

The PPM-88 is a Russian industrial respirator that uses a standard 40mm filter to protect its user from Chemical, Biological, Radioactive and Nuclear (CBRN) threats.

This gas mask was made famous by the game Metro 2033 and Metro: Last Light as it is the mask used by the player throughout the game and is commonly found throughout the game world.

A yellow variant of the mask can be found.

PPM Series OEM Industrial Filter

The PPM-88 Gas Mask at the start of Metro 2033 PC game.

Use

The PPM-88 and the PPM series is used as most gas masks usually are, for protection against airborne elements. But more specifically, the PPM series was made to protect against radiation in particular; offering this at nearly the same level as the PMK.

The PPM series is used in industry and by firefighters. They are not usually used by the military, as the PMK-3 is standard.

History

Like a lot of Russian masks, very little information about the PPM-88 is available through online channels. Please feel free to add anything you know on this subject.

Manufacturer/Distributor

PPM-88 in different variations is made by three manufacturers:

1. "Arti-zavod", which is part of "Zelinsky group",
2. "Briz-Kama Factory", which is part of "Trade House Briz",
3. "Yarti".

Arti-zavod manufactures the front part of this gasmask using two names: "MPG-IZOD" and "PPM-88". The product "MPG-IZOD" differs from the standard arrangement "PPM-88" presence of the second intercom and yellow inserts.

Briz-Kama Factory manufactures the face part of this gasmask using two names: "Briz-4301" and "Briz-4301M". The version with the name Briz-4301M differs in the absence of a plastic attachment on the visor. Thus the visor is non-replaceable and is fixed directly into the rubber. This face part is produced in black, yellow and turquoise. The mask has only a universal size.

Yarti manufactures the face part of this gas mask under the name "PM-88".

Components are stamped with year of manufacture.

The PPM-88 has a similar seal profile to that of the PMK and GP-7 masks.

The GOST Certificate (Page 4).

The GOST Certificate (Page 1).

The GOST Certificate (Page 3).

The GOST Certificate (Page 2).

The mask has a voicemitter on the left side of the mask. It does not appear to be capable of being converted to a filter port.

A marking appearing to suggest an instruction manual.

A closeup of the exterior marking.

Manufacturer stamp

Manufacturer stamp, size and date.

A simple inhale valve.

PPM-88 with Scott P100 Filter in 40mm DIN thread.

The polymer grill covering the exhale valve is thin and not very robust-looking.

Another close-up of the interior.

The PPM-88 with its sealed PPM Series OEM Filter

A more distant view of the mask's facial seal. A characteristically Russian profile.

The PPM-88 has the characteristic inward-folding face seal similar to the PMK and GP-7 series gas masks.

Yellow version

Clear shot of yellow PPM-88 with Mestel filter.

Yellow PPM-88 left side with Mestel filter.

Yellow PPM-88 right side with Mestel filter.

PPM-88 rear with straps.

Yellow PPM-88 interior.

Yellow PPM-88 interior markings.