FANDOM



The XM28 was competitor against the XM27 prototype gas mask to replace the M17.

HistoryEdit

Due to the M17's excessive weight, the XM27 was essentially an M17 made out of transparent silicone instead of rubber, and so was far more foldable than the original M17. It was also far lighter, a factor which proved beneficial to the troops in Vietnam. The XM27 weighed 1.1kg (2.5 pounds) while the XM28 weighed a far lower – 0.39kg (14 ounces).

Due to its improved flexibility, the XM27 could be packed into a small water proof bag, instead of the larger canvas carrier bag the M17 used. The M17 was carried on the leg of the wearer, which meant there was a higher risk of exposing the mask and carrier bag to water when wading through bodies of water, and due to the mask's weight, the carrier bag would often slip down the side of the leg, resulting in filter damage from the exposure to water.

XM-28.Aircrew.02.

XM26 (Helicopter Crew Version) from Johannes' collection [1]

Both masks were developed in 1966, by Edgewood Arsenal when the 1st Cavalry and 1st Infantry Division requested a compact, lightweight protective mask. The XM27 was discarded because of its extra weight. Throughout a two year period the XM28 was upgraded 4 times (hence the E4 designation). Full-scale production of the XM28 began in 1968. Since very few XM27s were produced, finding an example of one is highly unlikely.

The XM28 was created as a defense against RCAs (Riot Control Agents) such a Tear Gas, as specified on its carrier bag. The mask was used when American troops used Tear Gas to clear out caves and tunnels systems, operated by the Viet cong.

The mask is molded of matte silicon, and used perspex lenses that are glued onto the mask. The mask fits on the head with a 6-point head harness. The exhale valve is located behind the chin. The mask’s shape allows it to be folded and placed in a small carrier bag which can be carried on a belt or on the soldier’s STABO harness. The mask had plastic strips on the inside to prevent its shape from being lost. Putting the mask into the carrier bag was frustrating to do as it is nearly impossible to properly fit it in.

TriviaEdit

  • The XM28’s filters quickly expired and were replaced very frequently.
  • Due to the mask’s appearance it was dubbed the “grasshopper” mask.
  • Helicopter crews had a special helmet which could be worn with the mask.

VideosEdit

US Army XM28E4 "Grasshopper" Riot Control Gas Mask03:59

US Army XM28E4 "Grasshopper" Riot Control Gas Mask

GalleryEdit

ReferencesEdit

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.